Quote Originally Posted by rsterne View Post
WOW!.... I've never seen holes so badly aligned on any airgun.... The only good thing is that the bolt holes and the barrel port in the breech all line up (although off center), so (assuming the bolt holes in the tube are correct) at least the transfer port should line up.... Perhaps filing a flat across the transfer port location (the proper way would be to mill it) and then using a poly port might work?....

Industry Brand needs to have a hard look at their QC system....

Bob
yeah, that is one thing I was not expecting.....but what can I do :(

I am picking my brain...removable weather stripping may came into play....the stuff that comes in a caulking tube then dries to a gasket like material.