Trying to make a new nut for the muzzle end of my Mark 1, but can't get a positive ID on the thread. Closest I have is 3/8th @ 24tpi. goes in about 4 turns then locks.
Where am I going wrong here?
Cheers everyone,
-Nick
Trying to make a new nut for the muzzle end of my Mark 1, but can't get a positive ID on the thread. Closest I have is 3/8th @ 24tpi. goes in about 4 turns then locks.
Where am I going wrong here?
Cheers everyone,
-Nick