Does anyone know where one could get a 18cu.in. or slightly larger HPA tank with an adjustable type regulator in Canada?
Does anyone know where one could get a 18cu.in. or slightly larger HPA tank with an adjustable type regulator in Canada?
For every mile of road, there's two miles of ditch
My local paintball place has 4 or 5 sizes on the shelf. Might be worth a look.
Sean
AFAIK, none of the paintball style tanks have adjustable regulators.... they all need disassembly and spring/shim changes to change the setpoint....
Bob
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count!
You are correct Bob. I have an arsenal of PB tanks....mostly carbon fiber 50's and 68's. I am looking for a more local supplier of the 22ci with 2'' diameter. My thoughts are just start with the ninja 13ci and make my stuff fit, then make the plunge later and order the 22ci from down south. If my math is correct the 13ci volume is larger than my current HPA conversion tube. I have decided to set the idea of a new high priced airgun purchase aside and put the same amount of money into another QB78D HPA regulated(tank) custom setup. If this produces a setup like I am thinking it will then turn my attention to the at44 with the same regulated setup using a 22ci tank instead of the unregulated tube. There is no fun in leaving stuff alone!
For every mile of road, there's two miles of ditch
I should request a quote to see. They are located in Florida I understand? I thought Eric had 22ci tanks on his list once but not there anymore.
For every mile of road, there's two miles of ditch
Am I correct that my configuration of washers(0.032) and shim(0.020) will get me in the 1600 psi range in a ninja regulator.... | ) ) ( ) ( ) ( ) ( ) ( (....?
For every mile of road, there's two miles of ditch
Should be close, depending on shims....
Bob
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count!
Does scopes and ammo sell washers and shims? I am trying to get an order together there soon.
For every mile of road, there's two miles of ditch
Out of shims- trying to find a decent supplier- the "paintball" businesses who have offered up HPA tanks/parts in the past have only been fiddling in the HPA world and they have proven to be generally unreliable suppliers for these sorts of small parts. Problem is, companies like Fastenal only seem to have one or two of the correct sizes, but only one or two thicknesses. Who the heck out there has a real selection/inventory of Belleville washers?
I'd say I care- but I'd probably be lying...