I got some time to shoot some strings last night to test the plugging of the three lower holes.... I really like my "Chrony Connect" program and cables I got from the UK, it saves me having to stop and record every shot.... The velocities are stored in a file that I can copy into Excel.... I shot three strings with the hammer preload adjusted 6, 7, and 8 turns out from full in.... The new plastic locking plug in the adjusting screw works perfectly, NO sign of any creep in the adjustment any more.... Here are the results.... NOTE: pressures on the graph are in bar, not psi....
The first thing I noticed was how much smoother the curves are.... They don't have the large shot-to-shot jumps I saw previously.... It requires two turns more preload on the spring to get the same average velocities as with all six holes open.... but the peak velocity occurs at a slightly higher pressure than before, making a more even bell-curve rather than one with a long front end and quick fall-off after the peak.... This is typical of what I expect to see on restricting the flow slightly.... I also achieved an increase in the efficiency, ie slightly less air was used to generate the same FPE.... 7 turns out gave me 23 shots with 4% averaging 898 fps (45.5 FPE) filling to 200 bar and shooting down to 140, with an efficiency of 1.20 FPE/CI.... That's already a pretty potent quarter-bore....
I'm happy with these results, as they are consistent with what I saw on the .22 cal I worked on.... The bigger caliber required two turns more preload to get back to the same power, whereas the .22 cal only needed one.... I think all we are seeing there is the need for more airflow in the larger caliber.... The next step is to plug the remaining two holes and drill out the top hole to match the transfer port size....
Bob