ScopesAndAmmo.com Store Logo

+ Reply to Thread
Results 1 to 3 of 3

Thread: MuzzleMack's Extended Bulk Fill Valve Cap

  1. #1
    Senior Member sholo's Avatar
    Join Date
    Sun Jan 1 2012
    Location
    Slightly north of "out there"
    Posts
    354

    MuzzleMack's Extended Bulk Fill Valve Cap

    Would anyone know offhand if Joe's extended valve cap is long enough to cover the gauge port hole in a Disco tube?

    I plan to install an AR2078LE (thumb hole) stock on my 2260 HPA. Already have opened up the trigger slot to accept my Marauder trigger group, as well as the tube diameter. Only problem is that with my 13 ci bottle on a 2260 tube, I would have to cut the LE stock to fit - something I don't really want to do to such a nice stock! My thinking (right or wrong) is that the Disco tube is long enough to still have the bottle underneath the tube without having to cut the stock. Yes, I realize it will be a bit more "nose-heavy", but I can always add some weight to the butt if needed to balance it better. Seeing as I'm running a regulated bottle, I don't really need the gauge or the (somewhat) restrictive gauge block, hence my original question...

    Thanks for any suggestions you may have,
    Todd
    Todd

    Don't sweat the petty things, and don't pet the sweatty things!

  2. #2
    Moderator rsterne's Avatar
    Join Date
    Wed Dec 7 2011
    Location
    Coalmont, BC
    Posts
    1,266
    Yes it is.... It covers the roll-stamp in any of the 22XX tubes, and also the gauge hole in a Disco tube.... It is a larger bore to get rid of the 1/8" hole in the gauge block as well....

    Bob
    Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
    Airsonal: Too many to count!

  3. #3
    Senior Member sholo's Avatar
    Join Date
    Sun Jan 1 2012
    Location
    Slightly north of "out there"
    Posts
    354
    Thanks, Bob

    I'm using one now in the 2260 tube, just wasn't sure about the Disco...

    Todd
    Todd

    Don't sweat the petty things, and don't pet the sweatty things!

+ Reply to Thread

Similar Threads

  1. Bulk Co2 caplets- 400/pack...
    By AirGunEric in forum Dealer Area
    Replies: 2
    Last Post: Jun 08 2012, 05:09 PM
  2. I need a bulk fill hose like this in Canada
    By FRANK in forum Wanted/Where to Find in Canada
    Replies: 2
    Last Post: May 25 2012, 08:58 PM
  3. QB78D bulk fill conversion
    By just missed in forum Co2 and Pre-Charged Pneumatic (PCP) guns.
    Replies: 2
    Last Post: May 06 2012, 08:05 PM
  4. New .177 cal AR2078 barrel and extended probe
    By SeanMP in forum Customization and Craftsmanship
    Replies: 17
    Last Post: Apr 01 2012, 07:20 PM
  5. 2289 Valve
    By MSEO1 in forum Pump-Up Guns
    Replies: 7
    Last Post: Feb 24 2012, 08:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts