ScopesAndAmmo.com Store Logo

+ Reply to Thread
Results 1 to 5 of 5

Thread: Condor

  1. #1
    Moderator rsterne's Avatar
    Join Date
    Wed Dec 7 2011
    Location
    Coalmont, BC
    Posts
    1,266

    Condor

    Can somebody tell me the diameter and length (not including valve) of a 500cc Condor tank?.... Are there other sizes, and if so the dimensions?....

    Bob
    Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
    Airsonal: Too many to count!

  2. #2
    Administrator AirGunEric's Avatar
    Join Date
    Sat Dec 3 2011
    Location
    Somewhere Out There
    Posts
    1,295
    I have a 'Condor' tank and a 'Talon' tank- both appear to be the same physical size (neither of which are near me right now to measure)- but the valve itself (spacing/pin length) is a bit different.
    I'd say I care- but I'd probably be lying...


  3. #3
    Administrator AirGunEric's Avatar
    Join Date
    Sat Dec 3 2011
    Location
    Somewhere Out There
    Posts
    1,295
    Condor or Talon tank is 11 15/16" from bottom to end prior to valve- take off another 1/16" for the insulator- so you're looking at 11 7/8" x 2 9/16" (also estimated if the insulator is 1/16" x two sides- it measure 2 11/16")
    I'd say I care- but I'd probably be lying...


  4. #4
    Moderator rsterne's Avatar
    Join Date
    Wed Dec 7 2011
    Location
    Coalmont, BC
    Posts
    1,266
    Thanks Eric.... That's 500cc, right?.... Can you buy just a bare tank, no valve?.... Cost?....

    Bob
    Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
    Airsonal: Too many to count!

  5. #5
    Administrator AirGunEric's Avatar
    Join Date
    Sat Dec 3 2011
    Location
    Somewhere Out There
    Posts
    1,295
    It appears to be 500cc.
    I'd say I care- but I'd probably be lying...


+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts