ScopesAndAmmo.com Store Logo

+ Reply to Thread
Page 1 of 4 1234 LastLast
Results 1 to 10 of 32

Thread: Pellet doping

  1. #1
    Member
    Join Date
    Mon Jan 2 2012
    Location
    devon alberta
    Posts
    31

    Pellet doping

    Maurice.
    Lets talk airguns.I recently googled napier pro hunter pellets.They lube there pellets. The lube they use increases speed due to the fact that it is gassing off.

    I call this pellet doping.I've experimented with this for 2years.Amazing results without any problems.

    Soory if you play with this and have no PAL and you get caught by the law YU ARE IN DEEP CRAP.

    Anyone else play with this concept.

  2. #2
    Member Merlyn's Avatar
    Join Date
    Sat Dec 31 2011
    Posts
    48
    Do you have any idea what lube they use? This idea intrigues me a lot.

  3. #3
    Member
    Join Date
    Mon Jan 2 2012
    Location
    devon alberta
    Posts
    31
    Merlyn you can purchase napier pellet lube. Read up on it on the web.Be care full how you use it.

    I am new to the web and this is the first site i have ever posted info on.

    I will not post factuall data about this topic until i am sure it is ok to do so

  4. #4
    Administrator AirGunEric's Avatar
    Join Date
    Sat Dec 3 2011
    Location
    Somewhere Out There
    Posts
    1,298
    I'm not following this idea of "gassing off"?

    People seem to have found that on some (not all it seems) airguns, pellet lube can help seal the pellet in the bore a bit better- i.e. less gas blow-by around the pellet. Is this what the term 'gassing off' is implying?
    I'd say I care- but I'd probably be lying...


  5. #5
    Member
    Join Date
    Mon Jan 2 2012
    Location
    devon alberta
    Posts
    31
    Eric no to the qestion.
    Gassing off is the production of 2 seperate gases from certain oils, one being creanolein gas the other proethelein.Both are byproducts of the process of polymerization in the process of plastic production.
    The heat genarated buy spring or gas ram airguns precipitates this process.

  6. #6
    Senior Member SeanMP's Avatar
    Join Date
    Thu Dec 22 2011
    Location
    Just south of "Out There"
    Posts
    911
    I think the OP might be refering to combustion as "gassing off"

    I did follow a thread a couple years ago on another forum where a guy was treating pellets with all sorts of combustible lubricants and cleaners to find out what would happen. The upshot of all his tests is that the combustion of the products did increase the velocity however it was never consistent. The velocity bounced around like a yo yo even from something as small as dipping the skirt in WD40 and shaking off all the excess.

    He concluded it was a waste of time.
    Sean

  7. #7
    Senior Member SeanMP's Avatar
    Join Date
    Thu Dec 22 2011
    Location
    Just south of "Out There"
    Posts
    911
    Quote Originally Posted by maurice View Post
    Eric no to the qestion.
    Gassing off is the production of 2 seperate gases from certain oils, one being creanolein gas the other proethelein.Both are byproducts of the process of polymerization in the process of plastic production.
    The heat genarated buy spring or gas ram airguns precipitates this process.
    Gotcha....my apologies
    Sean

  8. #8
    Member
    Join Date
    Mon Jan 2 2012
    Location
    devon alberta
    Posts
    31
    SEAN
    At this time and experimentation only 20 fps max variation.method of application is crucial.

  9. #9
    Administrator AirGunEric's Avatar
    Join Date
    Sat Dec 3 2011
    Location
    Somewhere Out There
    Posts
    1,298
    Quote Originally Posted by maurice View Post
    At this time and experimentation only 20 fps max variation.method of application is crucial.
    Can you post some information/testing on this? It sounds interesting.
    I'd say I care- but I'd probably be lying...


  10. #10
    Member
    Join Date
    Sun Jan 1 2012
    Posts
    48
    So...
    you're intentionally dieseling...
    With the potential to get your fuel into your compression chamber and risk damage to the piston seal...

    Um... this is a good idea why?

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts