What say Eric?
Post and let him know what kind of interest there is...might make it happen.
I'm interested in a couple....if the price can be kept reasonable.
Al
What say Eric?
Post and let him know what kind of interest there is...might make it happen.
I'm interested in a couple....if the price can be kept reasonable.
Al
It would be a good idea to supply them c/w the Challenger/PRod/1700P hammer and striker so they are a drop in on the 22XX.... IMO....
Bob
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count!
I would be in for a couple, too. For sure!
Todd
Todd
Don't sweat the petty things, and don't pet the sweatty things!
Crosman (or at least the person who deals with Canadian dealers) has always been, let's say "reluctant" to ship any Marauder pieces to Canada as a result of them not selling the product into Canada. I can try to some parts into an order and see what happens.
Anyone have a list of all the part numbers required for the conversion?
I'd say I care- but I'd probably be lying...
PRod Trigger group - 2220-103 (mine didn't come with the safety ball and spring, but it should have, likely fell out before shipping)
Hammer - CH2009A009
Striker - 1763A036
Acetal Pin - CH2009-023 (stops the striker from rotating - not necessary if you run it at max power - ie full CCW)
Bob
Last edited by rsterne; May 06 2012 at 12:16 PM.
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count!
2200-1030 - this doesn't seem right. It is possibly 2220-103?
I'd say I care- but I'd probably be lying...
2220-103 is correct.... sorry about that....
Bob
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count!
Ok, I am at about $280, maybe $300 into my 2240 and I still haven't got the grips i want yet, and you guys are say'n there are more parts to make it even better and I need to save some buttons and banana's to put more $$ into the 2240????? And they are just drop in the slot where they fit and shoot???
Anybody got pics of these parts and what they will do if put into a 2240?
The wife is understanding...to a point...lol. But, if I can justify how much better it will make my/our 2240 shoot, I just might be able to swing something and exchange those buttons and banana's into $$$.
Fab
Remember! Blue side up.
Bob- what does the "striker" look like? I am trying to determine if the correct parts were shipped and what is labeled as the striker is not at all what I would have expected...
I'd say I care- but I'd probably be lying...
The striker looks like a 1/4" socket head set screw about 3/4" long with a thin, large diameter end opposite the hex hole for the allen key.... It screws into the front of the hammer with the hex hole inside and accessible from the back through the center of the hammer spring.... When screwed in all the way (which is CCW viewed from the back), the large, thin head sits right against the front of the hammer.... It is the part that strikes the valve stem.... It is the same part as used in the Marauder and provides an adjustable hammer length, and hence adjustable travel.... The further it sticks out the front of the hammer, the less distance the hammer travels before hitting the valve stem after being released by the sear.... Less distance means less energy....
Bob
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count!