ScopesAndAmmo.com Store Logo

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Any chance of the P-rod grips/trigger groups being available here?

  1. #1
    Member Gippeto's Avatar
    Join Date
    Sun Jan 1 2012
    Posts
    208

    Any chance of the P-rod grips/trigger groups being available here?

    What say Eric?

    Post and let him know what kind of interest there is...might make it happen.

    I'm interested in a couple....if the price can be kept reasonable.

    Al

  2. #2
    Moderator rsterne's Avatar
    Join Date
    Wed Dec 7 2011
    Location
    Coalmont, BC
    Posts
    1,266
    It would be a good idea to supply them c/w the Challenger/PRod/1700P hammer and striker so they are a drop in on the 22XX.... IMO....

    Bob
    Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
    Airsonal: Too many to count!

  3. #3
    Senior Member sholo's Avatar
    Join Date
    Sun Jan 1 2012
    Location
    Slightly north of "out there"
    Posts
    354
    I would be in for a couple, too. For sure!

    Todd
    Todd

    Don't sweat the petty things, and don't pet the sweatty things!

  4. #4
    Administrator AirGunEric's Avatar
    Join Date
    Sat Dec 3 2011
    Location
    Somewhere Out There
    Posts
    1,295
    Crosman (or at least the person who deals with Canadian dealers) has always been, let's say "reluctant" to ship any Marauder pieces to Canada as a result of them not selling the product into Canada. I can try to some parts into an order and see what happens.

    Anyone have a list of all the part numbers required for the conversion?
    I'd say I care- but I'd probably be lying...


  5. #5
    Moderator rsterne's Avatar
    Join Date
    Wed Dec 7 2011
    Location
    Coalmont, BC
    Posts
    1,266
    PRod Trigger group - 2220-103 (mine didn't come with the safety ball and spring, but it should have, likely fell out before shipping)

    Hammer - CH2009A009
    Striker - 1763A036
    Acetal Pin - CH2009-023 (stops the striker from rotating - not necessary if you run it at max power - ie full CCW)

    Bob
    Last edited by rsterne; May 06 2012 at 12:16 PM.
    Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
    Airsonal: Too many to count!

  6. #6
    Administrator AirGunEric's Avatar
    Join Date
    Sat Dec 3 2011
    Location
    Somewhere Out There
    Posts
    1,295
    2200-1030 - this doesn't seem right. It is possibly 2220-103?
    I'd say I care- but I'd probably be lying...


  7. #7
    Moderator rsterne's Avatar
    Join Date
    Wed Dec 7 2011
    Location
    Coalmont, BC
    Posts
    1,266
    2220-103 is correct.... sorry about that....

    Bob
    Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
    Airsonal: Too many to count!

  8. #8
    Member fabforce1's Avatar
    Join Date
    Mon Jan 2 2012
    Location
    PQ
    Posts
    63
    Ok, I am at about $280, maybe $300 into my 2240 and I still haven't got the grips i want yet, and you guys are say'n there are more parts to make it even better and I need to save some buttons and banana's to put more $$ into the 2240????? And they are just drop in the slot where they fit and shoot???
    Anybody got pics of these parts and what they will do if put into a 2240?

    The wife is understanding...to a point...lol. But, if I can justify how much better it will make my/our 2240 shoot, I just might be able to swing something and exchange those buttons and banana's into $$$.

    Fab
    Remember! Blue side up.

  9. #9
    Administrator AirGunEric's Avatar
    Join Date
    Sat Dec 3 2011
    Location
    Somewhere Out There
    Posts
    1,295
    Bob- what does the "striker" look like? I am trying to determine if the correct parts were shipped and what is labeled as the striker is not at all what I would have expected...
    I'd say I care- but I'd probably be lying...


  10. #10
    Moderator rsterne's Avatar
    Join Date
    Wed Dec 7 2011
    Location
    Coalmont, BC
    Posts
    1,266
    The striker looks like a 1/4" socket head set screw about 3/4" long with a thin, large diameter end opposite the hex hole for the allen key.... It screws into the front of the hammer with the hex hole inside and accessible from the back through the center of the hammer spring.... When screwed in all the way (which is CCW viewed from the back), the large, thin head sits right against the front of the hammer.... It is the part that strikes the valve stem.... It is the same part as used in the Marauder and provides an adjustable hammer length, and hence adjustable travel.... The further it sticks out the front of the hammer, the less distance the hammer travels before hitting the valve stem after being released by the sear.... Less distance means less energy....

    Bob
    Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
    Airsonal: Too many to count!

+ Reply to Thread

Similar Threads

  1. Left hand MK1 or 2 grips....
    By Rickoshea in forum Wanted/Where to Find in Canada
    Replies: 0
    Last Post: Apr 10 2012, 06:27 PM
  2. Paper groups with Stoeger match pellets
    By Dukemeister in forum Airgun Target Talk
    Replies: 0
    Last Post: Mar 31 2012, 05:45 PM
  3. Painted Grips
    By Gordo in forum General Airgun Questions
    Replies: 5
    Last Post: Feb 11 2012, 08:21 PM
  4. 2240 and QB78D Custom Grips and Stock
    By Merlyn in forum Customization and Craftsmanship
    Replies: 4
    Last Post: Jan 30 2012, 01:01 PM
  5. Where to buy wood for stocks and grips??
    By Merlyn in forum General Airgun Questions
    Replies: 9
    Last Post: Jan 03 2012, 12:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts