ScopesAndAmmo.com Store Logo

+ Reply to Thread
Page 1 of 4 1234 LastLast
Results 1 to 10 of 36

Thread: Lothar Walther ready to go for the AR/QBD

  1. #1
    Senior Member SeanMP's Avatar
    Join Date
    Thu Dec 22 2011
    Location
    Just south of "Out There"
    Posts
    911

    Lothar Walther ready to go for the AR/QBD

    Well there has been some grumblings about it being too quiet around here so I'll post up what I've been working for the last few days.

    One of Eric's Lother Walther barrels machined for the 15mm AR/QBd configuration

    I was waiting on bluing compound to complete the job. The bluing on this barrel is Slow Rust Blue. I think it turned out smashing

    DSCF0170.jpg

    Overall barrel showing the deep black of the rust blue process. This one shows warm tones in the right light which apparently is a sign of a fully developed rust blue treatment.

    DSCF0172.jpg

    View showing breach end. I tightened the tolerance over factory to minimize the wiggle these guns have in this area. Not by much though, a mere 0.003".

    DSCF0171.jpg

    View showing stepped target crown. It still needs the final pass with a brass crown tool

    I can't wait for the opportunity to whistle a bunch of different pellets downrange...stay tuned
    Sean

  2. #2
    Moderator rsterne's Avatar
    Join Date
    Wed Dec 7 2011
    Location
    Coalmont, BC
    Posts
    1,266
    Beautiful job, Sean.... I hope to be not too far behind you.... I have a 15mm OD LW blank in .25 cal sitting here now....

    Bob
    Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
    Airsonal: Too many to count!

  3. #3
    Member Dukemeister's Avatar
    Join Date
    Sat Dec 31 2011
    Location
    Kingston, Ontario
    Posts
    177
    Very nice looking. Where do you get slow rust blue?
    Member, Limestone Beekeepers Guild
    Duke ))))----//----------==

  4. #4
    Senior Member SeanMP's Avatar
    Join Date
    Thu Dec 22 2011
    Location
    Just south of "Out There"
    Posts
    911
    Sean

  5. #5
    Member just missed's Avatar
    Join Date
    Sun Jan 1 2012
    Location
    Ottawa
    Posts
    31
    Barrel looks great, just sent my request off to Eric. Can't wait.

  6. #6
    Member just missed's Avatar
    Join Date
    Sun Jan 1 2012
    Location
    Ottawa
    Posts
    31
    Could a QB78D be converted to a .25 by just swapping out the barrel and probe?

    John

  7. #7
    Senior Member SeanMP's Avatar
    Join Date
    Thu Dec 22 2011
    Location
    Just south of "Out There"
    Posts
    911
    Ya certainly

    There would be the normal fiddling around to dial in the required velocity that is normal when changing calibers
    Sean

  8. #8
    Moderator rsterne's Avatar
    Join Date
    Wed Dec 7 2011
    Location
    Coalmont, BC
    Posts
    1,266
    My intention is just to machine off the forward part of the bolt, drill and tap it, and make a larger front section carrying a larger O-ring and pellet probe....

    Bob
    Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
    Airsonal: Too many to count!

  9. #9
    Member Dukemeister's Avatar
    Join Date
    Sat Dec 31 2011
    Location
    Kingston, Ontario
    Posts
    177
    Quote Originally Posted by rsterne View Post
    My intention is just to machine off the forward part of the bolt, drill and tap it, and make a larger front section carrying a larger O-ring and pellet probe....

    Bob
    Would you post a pictorial of how to do the probe, please Bob?
    Member, Limestone Beekeepers Guild
    Duke ))))----//----------==

  10. #10
    Moderator rsterne's Avatar
    Join Date
    Wed Dec 7 2011
    Location
    Coalmont, BC
    Posts
    1,266
    Will do when I machine the bolt....

    Bob
    Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
    Airsonal: Too many to count!

+ Reply to Thread

Similar Threads

  1. Lothar Walther Airgun barrel blanks...
    By AirGunEric in forum Dealer Area
    Replies: 43
    Last Post: Apr 21 2012, 03:16 AM
  2. QB's, instock and ready to ship...
    By AirGunEric in forum Dealer Area
    Replies: 3
    Last Post: Mar 18 2012, 05:03 PM
  3. Replies: 11
    Last Post: Feb 19 2012, 12:09 PM
  4. Lothar Walther Barrel
    By remtom1200 in forum Wanted/Where to Find in Canada
    Replies: 9
    Last Post: Feb 03 2012, 10:00 AM
  5. Walther CP88 Competition LNIB
    By Acky1 in forum For Sale
    Replies: 1
    Last Post: Feb 02 2012, 05:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts