here a little tutoral about tuning the trigger assy on this little rifles.

you allready know how to remove the stock from the action. si i'll skip this part

open the trigger assy box , you will find that inside it's pretty symple.
IMG_1050.jpg

remove the two parts of the trigger assy (be carefull of the spring position and not to drop it as it WILL jump off the shaft )

wi will cleen , debur and polish the three friction point
IMG_1053.jpgIMG_1052.jpg

for that i used a triangle flat single file bastard file and wet or dry 800 sand paper
IMG_1058.jpgIMG_1054.jpg

carefuly filing and sanding, i removed burs and cleaning all tool mark . carefull not to round off edges .

here is the results
IMG_1057.jpgIMG_1055.jpgIMG_1056.jpg

i greased up the pats and reassembled

after that is left ajusting the trigger

good tuning guys !