ScopesAndAmmo.com Store Logo

+ Reply to Thread
Results 1 to 7 of 7

Thread: QB78D Laminate Stock "before" and "after" from Microfit.

  1. #1
    Member Merlyn's Avatar
    Join Date
    Sat Dec 31 2011
    Posts
    48

    QB78D Laminate Stock "before" and "after" from Microfit.

    Here are some pics of what the roughed out semi-inletted QB stock looked like when received from Richard's Microfit. Barrel and action fit like a glove and required no further inletting or other adjustmants. The stock, however cost about 60 hours of cutting, sanding, fitting, and finishing.
    as received.jpgbefore sanding.jpgrough forearm.jpgrough stock.jpg

  2. #2
    Member Merlyn's Avatar
    Join Date
    Sat Dec 31 2011
    Posts
    48
    And here is the finished product (except for the brass butt plate which is in a state of finishing right now).
    Thanks for looking!
    Attachment 203 Attachment 204 Attachment 205 Attachment 206 Attachment 207

  3. #3
    Moderator poil27's Avatar
    Join Date
    Sat Dec 31 2011
    Location
    not out enough
    Posts
    420
    looks good for the first part
    can't see the final product

  4. #4
    Member Merlyn's Avatar
    Join Date
    Sat Dec 31 2011
    Posts
    48
    I get the same error report as you when I click on another person's posted pics, but when I click on the attachment in my own post, I get the pics. I don't understand. I sent up 4 on the first post and they all showed up as pics and not as a link, then 5 on the second one all came up as links. I wonder if the problem is based upon the number of pics you post. I think 5 is the max you can upload so I will try 4 this time to see what happens. If no luck, I will just have to give up I guess. Hope this works.

    Tried but to no avail. Guess I just don'y get to show off the handiwork afterall.

  5. #5
    Administrator AirGunEric's Avatar
    Join Date
    Sat Dec 3 2011
    Location
    Somewhere Out There
    Posts
    1,295
    The vbulletin people seem to have just "forgotten" about this posting issue- I have sent another email to remind them the issue still exists...
    I'd say I care- but I'd probably be lying...


  6. #6
    Member Merlyn's Avatar
    Join Date
    Sat Dec 31 2011
    Posts
    48
    Thanks Eric. Patinece is a virtue (they say). Hopefully they read their mail soon. Thanks again.

  7. #7
    Senior Member SeanMP's Avatar
    Join Date
    Thu Dec 22 2011
    Location
    Just south of "Out There"
    Posts
    911
    Sean

+ Reply to Thread

Similar Threads

  1. Doesn't really qualify as "Craftsmanship"- but it was my "first" airgun (1077) mod...
    By AirGunEric in forum Customization and Craftsmanship
    Replies: 11
    Last Post: Feb 02 2012, 04:02 PM
  2. "Approval" to post?
    By Doc Sharptail in forum Forum Announcements and Questions
    Replies: 29
    Last Post: Jan 19 2012, 07:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts