Al finally figured out how to make moulds for this long, skinny bullet, and it's now in the NOE Store.... http://noebulletmolds.com/NV/index.php?cPath=374_376



The moulds are in limited quantity, three each of 2, 3, 4, and 5 cavity in aluminum.... Recommended twist is 7", and TJ's have a mandrel available to make barrels.... The high Sectional Density of this bullet will require the use of long barrels, and high pressure, in order to reach appropriate velocities.... 3600 psi and 30" long, or an equivalent combination, is the recommended minimum....

There is a 20% off sale on this week at NOE, the discount code is 02761812 ....

Bob