The 135 gr. Bob's Boattail I designed for NOE Moulds has proceeded to Group Buy status.... Here is what it looks like....



It will be available as a 2-5 cavity mould in aluminum or brass, and the Lyman HollowPoint style pin can be ordered in one cavity, with a weight of 130 gr.... NOE's usual Group Buy rules and prices will apply.... If you wish to get in on this mould, put your name down at the link below....

http://noebulletmolds.com/smf/index....ic,1321.0.html

The nose diameter is 0.308", with the center section 0.298" to eliminate drag on the rifling, and the drive band is 0.310".... although you can request a slight change when you order.... A 14" twist or faster is recommended....

Bob