ScopesAndAmmo.com Store Logo

+ Reply to Thread
Results 1 to 10 of 10

Thread: My 2015 FT Rig Custom

  1. #1
    Member
    Join Date
    Sat May 5 2012
    Posts
    220

    My 2015 FT Rig Custom

    This is my New Rig I working on, it's far from completed. but you will see my idea.

    Started with a MAC1 Tuned Disco
    A Disco double tube kit.
    Adjustable trigger grip from a 2240
    Added a RVA
    Scope is a ZOS 10-40X60 copy of Falcon T-50 <--- sorry.
    Weaver style barrel rings. for installation of Front Grip and accessories.
    Need New scope mounts and a read stock. I wanted to make a custom Skeleton rear stock But it's would be lots of work to get it to work with my
    R.V.A. so maybe I will order a cheap bug buster or something similar.

    This will be adjusted to 780fps for WFFT



    Benjamin Discovery Mac1 modded <----- Ya Baby the new toy
    Webly Alecto .177
    QB79- with lots and lots of mods HPA <------ Go too AirGun for FT

  2. #2
    Administrator AirGunEric's Avatar
    Join Date
    Sat Dec 3 2011
    Location
    Somewhere Out There
    Posts
    1,263
    Apparently, something happened to your pictures- perhaps loading them on the forum so things don't disappear (and thus why photos can be loaded onto the forum/into the forum database) would be a plan...
    I'd say I care- but I'd probably be lying...


  3. #3
    Member
    Join Date
    Sat May 5 2012
    Posts
    220
    No I did it Everyone and there mothers was pming me you can't make a pistol over 500 fps.
    They could not understand that is was a rifle. with a pistol grip and 100% legal . and I have my Rpal Even if it was a pistol I'm still legal.
    so I took pic's off line because most forums you can't edit your post after you have posted it a few hours. so only way to stop it was to delete pics.
    Benjamin Discovery Mac1 modded <----- Ya Baby the new toy
    Webly Alecto .177
    QB79- with lots and lots of mods HPA <------ Go too AirGun for FT

  4. #4
    Member
    Join Date
    Sat May 5 2012
    Posts
    220
    well here you go still some parts missing but.... it's starting to look like a FT Rig.


    Benjamin Discovery Mac1 modded <----- Ya Baby the new toy
    Webly Alecto .177
    QB79- with lots and lots of mods HPA <------ Go too AirGun for FT

  5. #5
    Administrator AirGunEric's Avatar
    Join Date
    Sat Dec 3 2011
    Location
    Somewhere Out There
    Posts
    1,263
    Well, the determination of it being a pistol vs. a rifle would be something for the CFC to decide. If your tube is from a known 'rifle'- i.e. a Crosman 2260 or Discovery (the tube is what they CFC has used as the 'receiver' for classifying things in the past as it has the serial number on it)- then it should, by default, be classified as a rifle. The problem is that if it is classified a Restricted firearm, then it must also be registered- so if nothing else, double-check things so no one gets into trouble.

    In any event, it looks good. What is joining the two tubes together (i.e for gas flow)?
    I'd say I care- but I'd probably be lying...


  6. #6
    Member
    Join Date
    Sat May 5 2012
    Posts
    220
    a passtrou bolt with orings, a bolt with a hole in the center like a hydraulic one.

    it's a Discovery tube, I even had it registered in the days of Long Gun Registry.
    Benjamin Discovery Mac1 modded <----- Ya Baby the new toy
    Webly Alecto .177
    QB79- with lots and lots of mods HPA <------ Go too AirGun for FT

  7. #7
    Moderator rsterne's Avatar
    Join Date
    Wed Dec 7 2011
    Location
    Coalmont, BC
    Posts
    1,261
    Eric, the Disco Double Kit from AirGunLab has two new threaded front fittings, and the air passes between them through a properly engineered fitting, sealed by O-rings and secured by a vertical screw.... The triple barrel band is also part of the kit, and assures proper alignment of the components....

    Bob
    Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
    Airsonal:
    .177 Diana 34, 1750 CO2 Carbine, .177 Uber-Pumper, .22 Uber-Carbine, .25 Discovery, 22XX PCP 8-shot Carbine, 2260 PCP Rifle (50 FPE), Hayabusa PCP, .22 B-26, DAQ .308 Exile

  8. #8
    Administrator AirGunEric's Avatar
    Join Date
    Sat Dec 3 2011
    Location
    Somewhere Out There
    Posts
    1,263
    Ah OK- so this was the actual kit, as opposed to a one-off custom by Frank (or whoever). I thought those barrel bands looked familiar... :)
    I'd say I care- but I'd probably be lying...


  9. #9
    Member
    Join Date
    Sat May 5 2012
    Posts
    220
    I bought one of the first kits, The black Barrel bands I just bought recently, they have a weaver hookup on the bottom.
    Benjamin Discovery Mac1 modded <----- Ya Baby the new toy
    Webly Alecto .177
    QB79- with lots and lots of mods HPA <------ Go too AirGun for FT

  10. #10
    Member
    Join Date
    Sat May 5 2012
    Posts
    220
    90% done cheek rest and eye rubber are still needed. and tuning and practice.


    Benjamin Discovery Mac1 modded <----- Ya Baby the new toy
    Webly Alecto .177
    QB79- with lots and lots of mods HPA <------ Go too AirGun for FT

+ Reply to Thread

Similar Threads

  1. Beeman 1040 with custom stock and accessories
    By theblackbirder in forum For Sale
    Replies: 5
    Last Post: Jun 10 2014, 10:09 AM
  2. custom Crosman Mark 1 grips
    By NickT in forum Wanted/Where to Find in Canada
    Replies: 1
    Last Post: Mar 06 2013, 08:24 PM
  3. Custom QB78 .177 .22 dual caliber.
    By FRANK in forum For Sale
    Replies: 7
    Last Post: Feb 02 2013, 10:03 PM
  4. Custom qb 79 magazine
    By Mudbug in forum Customization and Craftsmanship
    Replies: 7
    Last Post: Feb 18 2012, 08:02 PM
  5. 2240 and QB78D Custom Grips and Stock
    By Merlyn in forum Customization and Craftsmanship
    Replies: 4
    Last Post: Jan 30 2012, 02:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts