8 Attachment(s)
qb7x /ar207x trigger tune
here a little tutoral about tuning the trigger assy on this little rifles.
you allready know how to remove the stock from the action. si i'll skip this part
open the trigger assy box , you will find that inside it's pretty symple.
Attachment 347
remove the two parts of the trigger assy (be carefull of the spring position and not to drop it as it WILL jump off the shaft )
wi will cleen , debur and polish the three friction point
Attachment 348Attachment 349
for that i used a triangle flat single file bastard file and wet or dry 800 sand paper
Attachment 350Attachment 351
carefuly filing and sanding, i removed burs and cleaning all tool mark . carefull not to round off edges .
here is the results
Attachment 352Attachment 353Attachment 354
i greased up the pats and reassembled
after that is left ajusting the trigger
good tuning guys !