Hi to all, happy Black Friday.
I have a issue with my Guerrilla 48 Cu in HPA tank, it leaks down to regulator pressure (800-850 psi) and then stays put. AFAIK it was fine when new. Has the regulator "failed"? it's got a myth micro regulator on it. Twice I have pumped it up to 1500 psi and then when I come back to it a day later it's leaked down to reg pressure. After the first incident, I pumped it to 1000 psi and attached a balloon to the ASA fitting and one to the fill fitting and left it overnight, all was fine. Then I immersed the bottle in soapy water to look for bubbles... no bubbles. So I continued pumping to 1500 psi and again, it has leaked out overnight. I can pump it back to 1500 psi and do the bubble check, but if anyone has any advice on what's going on I'd appreciate it. It takes a few pump strokes to get it from 1000-1500 psi (sure glad I didn't go to 3000 last time).
